GAI-Tronics 238-001 Stainless Steel Surface-Mount Enclosure - Manual

Pub. 42004-434B
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374  800-492-1212  Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 238-001
Stainless Steel Surface-Mount Enclosure
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information which is confidential and proprietary to GAI-Tronics.
GAI-Tronics retains all intellectual property and other rights in or to the information contained herein,
and such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
The Model 238-001 Stainless Steel Surface-Mount Enclosure is designed to house all standard
GAI-Tronics flush-panel telephones, which measure 12.13 H
 10.18 W inches. The following
components are supplied with the Model 238-001 Enclosure:
Qty Description
1 Telephone jack
1 Adhesive pad (double sided)
1 C AUTION label
1 Access hole gasket
4 Rubber washers
Installation
Safety Guidelines
When installing GAI-Tronics’ telephone equipment, please adhere to the following guidelines to ensure
the safety of all personnel:
 NEVER install telephone wiring during a lightning storm.
 NEVER install telephone jacks in wet locations unless the jack is specifically designed for wet
locations.
 NEVER touch uninsulated telephone wires or terminals unless the telephone line has been
disconnected at the network interface.
 USE CAUTION when installing or modifying telephone lines.