GAI-Tronics 7335-002 Multi-Party 24 V DC Amplifier Enclosures - Manual

Pub. 42004-141G
GAI-Tronics Corporation 400 E. Wyomissing Ave. Mohnton, PA 19540 USA
610-777-1374  800-492-1212  Fax: 610-796-5954
V ISIT WWW . GAI - TRONICS . COM FOR PRODUCT LITERATURE AND MANUALS
G A I - T R O N I C S ® C O R P O R A T I O N
A H U B B E L L C O M P A N Y
Model 703-002, 7325-102, and 7335-002
24 V DC Multi-Party Amplifier Enclosures
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information that is confidential and proprietary to GAI-Tronics. GAI-
Tronics retains all intellectual property and other rights in or to the information contained herein, and
such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
This manual applies to the following GAI-Tronics amplifier enclosures:
Model Description
703-002 Indoor Amplifier Enclosure; multi-party, 24 V dc input
7325-102 Weatherproof Aluminum Enclosure; multi-party, 24 V dc input
7335-002 Weatherproof Non-metallic Amplifier Enclosure; multi-party, 24 V dc input
The amplifier enclosure is an important component of the 700 Series Page/Party ® system. These
enclosures are configured for multi-party systems and can accommodate conversations on up to five party
lines simultaneously.
The Model 703-002 Indoor Amplifier Enclosure is constructed of fabricated steel. The Model 7325-102
Outdoor Enclosure is made of cast aluminum alloy, and the Model 7335-002 Outdoor Enclosure is made
of glass-reinforced polyester. Both outdoor enclosures are extremely weatherproof and corrosion-
resistant.
These enclosures are equipped with terminal strips for connecting inter-station cable. The 701 and 751
Series Amplifiers mate directly with these enclosures.
Installation
CAUTION
Do not install this equipment in hazardous areas or areas other than those
indicated on the approval listing in the “Specifications” section of this manual. Such installation
may cause a safety hazard and consequent injury or property damage.