Formax 6404 Series - Manual (Page 86)

OMR advanced license
For the OMR advanced license the following functions are available:
• The basic functions (Start, Insert, Parity, Safety)
• Divert (Divert & Continue) - The set will be diverted and the system continues.
• Stop (Divert & Stop) - The set will be diverted and the system stops indicating error
(VS:113 - Reading stop - Stop mark read).
• Selective Feed - The machine will selectively feed an enclosure when commanded
so.
• Sequence Check - Sheets in a stack can accidentally get out of sequence or can be
missing.This can be detected by the sequence check. Each sheet has a binary code
that is a part of the reading code. Depending on the application one, two or three
marks are used by sequence check.
OMR general remarks
General remarks:
• In case of OMR the marks must always be used in the sequence as shown in the
figure.
• If a function is suppressed the following function will move upwards one line.
• The mark definition is a service setting.
7
En
glish
79
| Page 79 | jan-06-2012 13:58 |