Formax 6404 Series - Manual (Page 31)

Feeding documents (Production Feeder)
To feed documents:
When filling the production feeder, make sure that the
document/BREs are positioned parallel in relation to the
feed plate to ensure correct feeding.
The feeding plate assembly will be shifted up automatically (when the system starts
processing) until documents/BREs are underneath the rubber paper pullers.
1. Squeeze the two blue handles A and B.
2. Shift the feeding plate C to the rear position.
3. Loosen the stack of documents and place them in the feeder.
BREs with flap down and leading (top side pointing to system).
High Capacity Document Feeder (HCDF)
The High Capacity Document Feeder is an option that can be delivered from factory, or
added to a 2 or 4 station version by a service engineer. The High Capacity Document
Feeder has a capacity for up to 725 sheets.The normal document feeder tray has a capacity
of 325 sheets.
24
| Page 24 | jan-06-2012 13:58 |
3
En
glish