Formax 6404 Series - Manual (Page 54)

In the top of the screen, three selection buttons are displayed, from which one can be
selected. The selected settings button will be highlighted.
• Press the button to select an envelope with closed flap. This means that the
envelopes are fed with closed flap.
Use the button to enter the applicable dimensions. It is also possible to select
ISO standard envelopes or dimensions in inches (depends on the installation settings).
The envelope height can be set between 90 mm (3.5 inch) and 162 mm (6.38 inch).
• Press the button to select an envelope with open flap.This means that envelopes
are fed with open flap. Use the upper button to enter the applicable dimensions.
The envelope height can be set between 90 mm (3.5 inch) and 162 mm (6.38 inch).
It is also possible to select ISO standard envelopes or dimensions in inches (depends
on the installation settings). Use the second button to enter the flap height.The
flap height can be set between 32 mm and the envelope height minus 32 mm (1.26
inch).
• Press the button to define a job without inserting the documents in envelopes
(no envelope mode). This can be useful for jobs, where documents only have to be
sorted and/or folded.
5
En
glish
47
| Page 47 | jan-06-2012 13:58 |