Formax 6404 Series - Manual (Page 115)

Remarks:
• The specification of the paper handling equipment is often wider than that of the
envelopes and documents handled. The condition of material handled will limit the
specified environmental conditions.
• We recommend that materials to be handled are stored at a temperature of 20°C
(68°F) with a relative humidity factor of 50%. If difference in temperature occurs
between store room and mailing area, the material has to be stored near the machine
at least 24 hours before use.
• Self-copying paper may cause rubber parts to wear quicker. The rubber used in this
machine has the best resistance to Wiggins Teape material.
Production Feeder Specifications
Model FD 6404-00 Model
High capacity feeder Type
4000 inserts per hour, depending on
application, see
Technical Specifications
on page 105
Theoretical max. speed
Low voltage supplied by the inserter sys-
tem. Power consumption
EMC Certificate conform EMC-Directive.
FCC Certificate conform 47CFR, part 15.
UL Listed I.T.E. (Information Technology
Equipment),
conform UL-IEC 60950-1, file: E153801.
Conform NEN-EN-IEC 60950-1 and
derivatives.
Approvals
210 mm (8.3 inch) Height
285 mm (11.2 inch) Width
425 mm (16.7 inch) Length
5.05 kg (11.1 lbs) Weight
See Technical Specifications on page 105 Noise level
10°C - 40°C (50°F-104°F) Operating temperature
30%-80% Humidity
1200 sheets A4 80 gr.
320x Business Reply Envelopes Feed tray capacity
108
| Page 108 | jan-06-2012 13:58 |
11
En
glish