Job settings, Envelope settings, Elopes with open flap (see – Formax 6404 Series User Manual
Page 53: En glish
5.
Select a job number and press
[OK].
Job settings
From the job settings menu the following settings are available:
•
on page 46);
•
Document settings (see
on page 48);
•
Fold settings (see
on page 50);
•
Reading settings (if installed, see
on page 52);
•
Double feed control settings (see
on page 55);
•
on page 56);
•
Mailing/Franking settings (if installed) (see
on
page 57);
•
Mail Piece Production Control (MPPC) settings (if installed) See the appendix
operator manual Mail Piece Production Control.
If you want to view the job details of the current job, press the
button. If you want to
run a test, press the [
1x] button.
Envelope settings
In the ‘envelope settings’ menu you can define the envelope properties and switch the
sealing on and off.
46
| Page 46 | jan-06-2012 13:58 |
5
En
glish