Formax 6404 Series - Manual (Page 47)

5. Press [Save] to save the job with the entered settings under the specified job number
and name.
To name a job, see Job name settings on page 56.
6. Press the [1x] button to verify that the insert position and address position are correct
(see Verifying the Insert Position on page 37 and Adjusting the address position on
page 35).
Performing a test run
Before starting a job, it is possible to perform a single test run with the settings of the current
job.
To perform a test run:
1.
In the home menu, use the arrows to scroll through the Job selection list.
2. Select the job you want to use.
3. Click the [1x] button.
40
| Page 40 | jan-06-2012 13:58 |
5
En
glish