Formax 6404 Series - Manual (Page 49)

Using a job
If you want to use an existing job:
1.
From the home menu, select the job you want to use.
2. If you want to perform a test run:
Press the [1x] button to do a test run.
3. If you want to change the counter for this job:
Press the [Counters] button to make changes to the amount of mail sets that the job
produces.
4. Press the [Start] button to start the job.
Editing a job
To edit an existing job:
1.
From the home menu, select a job you want to edit.
2. Press the [Edit] button.
42
| Page 42 | jan-06-2012 13:58 |
5
En
glish