En glish – Formax 6404 Series User Manual
Page 109
on page 17
Adjust envelope sepa-
ration.
Envelope separation
not correctly set.
Envelopes are double
fed.
on page 17
Check and replace if
needed.
Envelopes not placed
properly in the hop-
per.
on page 17
Check side guides
and adjust if needed.
Side guides of the
envelope hopper are
set too wide.
Envelope stops
skewed.
on page 17
Refill hopper.
Hopper almost empty.
Envelopes are fed ir-
regularly.
on page 17
Adjust envelope sepa-
ration.
Separation set too
narrow.
on page 17
Check side guides
and adjust if needed.
Side guides set too
narrow.
on page 17
Reposition the enve-
lope support.
Envelope support not
positioned correctly.
on page 37
Check specifications
and change en-
velopes if needed.
Envelope not within
specifications.
Flap is wrinkled and
sometimes not
opened.
on page 37
Store envelopes ac-
cording to specifica-
tions.
Flap sticks.
on page 37
Envelopes stored or
manufactured improp-
erly.
Flap curled.
on page 17
Adjust envelope sepa-
ration.
Separation set too
narrow.
Adjusting the enve-
lope insert fingers
on page 36
Check fingers posi-
tion, adjust if needed.
Fingers adjusted too
deep into the enve-
lope.
Fingers are placed on
top of the envelope.
on page 37
Check envelope stop
position, adjust if
needed.
Envelope stops too
early.
102
| Page 102 | jan-06-2012 13:58 |
10
En
glish