Formax 6404 Series - Manual (Page 83)

Running a BCR test
To run a BCR test:
Before running a BCR test, select a job that uses BCR reading.
1. In the Test menu, press the [BCR test] button. The BCR test menu appears.
2. Press the [Test] button to start the BCR test. After the test is finished, the Result
screen appears.
3. In the Results screen, evaluate the test results.
Use the button to see the BCR info, or use the button to cycle through all
BCR codes that were detected during the test. Select the one you want to use for
reading.
4. Press the [Back] button to return to the BCR test menu.
76
| Page 76 | jan-06-2012 13:58 |
7
En
glish