Formax 6404 Series - Manual (Page 18)

High Capacity Vertical Stacker
The High Capacity Vertical Stacker can be used to stack filled envelopes. The vertical
stacker can store up to 325 filled envelopes. The vertical stacker can be equipped with
Mail Piece Production Control (MPPC). In case you have a High Capacity Vertical Stacker,
install it as follows on your system:
1.
Move the stacker as indicated by the arrow.
2. Lift the stacker with the suspension hooks over the two rods (upper and lower) and
lower it.
3. Connect the connector
4. Adjust the side guides with wheel A until a margin of 3 to 5 mm is left between the
envelopes and the side guides.
5. For small envelopes it can be necessary to remove the extensions B from the envelope
support.
Power Up
To start up the system:
You can severely damage the machine if it is connected to the
incorrect power supply. Before plugging in the machine, check if
the local voltage is the same as the voltage mentioned on the type
plate.
1. Connect the system to the mains power supply.
2
En
glish
11
| Page 11 | jan-06-2012 13:58 |