Formax 6404 Series - Manual (Page 20)

Job Info
If you want more information on a job, select the job in the ‘home’ menu.
The ‘current job’ menu shows the following information of the selected job:
• Job number and Job name
• Total: total number of envelopes that have been processed using this job
• To do: number of envelopes to do. Only indicated if a ‘stop at’ value is set.
• Stop at: number of processed envelopes at which the system stops.You can set this
number with the [Counters] button.
You can set it between 0 (switched off) and 9999. The system will continue until the
job counter reaches the stop counter value. The system stops and can be restarted.
The stop counter is switched off when it is set to zero.
If you want to reset the daily job counter and the stop counter, press the [Reset TOTAL
Counter] button in the ‘counters’ menu.
The counter settings are job related.
2
En
glish
13
| Page 13 | jan-06-2012 13:58 |