Formax 6404 Series - Manual (Page 68)

2. Use the arrows next to the volume symbol to increase or decrease the interface
volume.
3. Press the button to toggle the orientation of the display screen. This function is
useful in case of applications when the operator is working on the backside of the
system.
Viewing System info and Software versions
From the Supervisor menu, you can view the System info and Software versions.
Proceed as follows:
1.
From the Supervisor menu, press the [System info] button.
The System info menu opens.
Here, the following information is shown:
- Flex certificate - this option is used for OMR;
- Counter since last visit - the counter value since the last service visit;
- Last error - The last error generated by the system.
2. Press the [Software versions] button to view information on the version of the installed
software.
The ‘software versions’ menu opens.
This screen shows the software versions that are present in the total system.
Pressing the
[i] button shows the subversion revision numbers instead of the standard
software version numbers. Generally these are used for development reasons, but
sometimes it’s convenient to have them for trouble shooting reasons.
6
En
glish
61
| Page 61 | jan-06-2012 13:58 |