Formax 6404 Series - Manual (Page 106)

3. Remove the envelope(s) from the lower envelope track.
4. Close the side cover.
5. Press the [Reset] button to reset the error and restart the job.
Folding Area
When a stoppage occurs in the Folding area, remove the documents as follows:
1. Push the lower end of the locking handle A to open the powerFold cover B.
2. Remove the documents from the Folding area.
If necessary use the delivered pin to turn the rollers. The pin is
delivered in the spare parts bag. Do not forget to remove the pin
when finished.
3. Close the Folding area cover.
4. Press the [Reset] button to reset the error and restart the job.
10
En
glish
99
| Page 99 | jan-06-2012 13:58 |