Flowserve SPECTORcontrol - Manual (Page 80)

80
Burner Menu
– con tinued –
Operating mode
1. Press button Operating mode in the menu Burner Set-up .
2. The menu Operating mode is password
protected. Press button and enter your
password.
3. The current MODBus mode is indicated
in a yellow field. To change the mode
press button
Setup at the right hand side.
4. The current MODBus downtime is indi-
cated in a yellow field.
5. Click in the green input field to define a
MODBus downtime.
6. The current value appears in the input
mask. Use the on-screen keyboard to overwrite or modify the value.
7. Press button to accept the value.
8. The current remote operating mode is indicated in a yellow field. To change the mode
press button
Setup at the right hand side.
Mode
1. Press button Setup in the menu Operating mode .
2. Press button Local or Remote to set the desired
mode.
Operating mode
1. Press button Setup in the menu Operating mode .
2. Press button Auto , or On or Off to set the desired
operating mode.
Logo
Operating mode
Input
MODBus
Mode
Auto
MODBus
Downtime
Operating mode:
Remote
Local
AZL values
Setup
Setup
0 sec.
Name of
Mode
Local
Remote
Operating mode
Auto
On
Off