Flowserve SPECTORcontrol - Manual (Page 77)

77
Burner Menu
– con tinued –
Burner set-up
To set up the burner press button in the menu Burner .
The display field shows the adjustable data of the burner.
■ To select the used fuel press button Fuel .
■ To adjust the limits of operating hours or to
reset current values press button
Operating
hours .
■ To adjust temperature setpoints press button
Setpoint .
■ To parameterise the capacity controller
press button
Capacity controller .
■ To show or edit the current values of the
start-up counter press button
Start-up
counter .
■ To synchronise the time press button Set time .
■ To configure the controller press button Operating mode .
Fuel
1. In the menu Burner Set-up press button Fuel .
2. To change the adjusted fuel click in the
green input field. The display alternates
between oil and gas. To confirm your entry
press button
.
Burner
Set-up
Logo
Operating hours
Setpoint
Start-up counter
Set time
Fuel
Operating mode
Capacity controller
Fuel Logo
Name of parameter
Current fuel
Fuel selection
of the AZL
AZL values Input