Controller menu – Flowserve SPECTORcontrol User Manual
Page 53
53
– continued –
- con tinued -
8.
Select the signal that indicates the required parameters. For more information on the
setup and configuration of the equipment see menu CAN Input and Analog Input.
9.
The green input field
Position
shows the position indicator. To select a position feed-
back signal click in the green input field. All adjusted signals will be indicated.
10. Select the signal that indicates the required parameters. For more information on the
setup and configuration of the equipment see menu
CAN Input
and
Analog Input
.
11. The green input field
On
and
OFF
shows the adjusted signal receiver. Click in the
input field to show all established signals.
12. Select the digital output that shall be activated. You will find more information on
equipment setup in the menu Digital Outputs.
13. The green input field
Offset
shows the current value. To enter or change a value click
in the input field.
14. The adjusted value appears in the input mask. Use the on-screen keyboard to over-
write or modify the value.
15. The green input fields
Min/Max limit
show the current limit values. To enter or
change a value click in the input field.
16. The adjusted value appears in the input mask. Use the on-screen keyboard to over-
write or modify the value.
17. The green input fields
Min. pulse
and
Valve run time
show the current values. To
enter or change a value click in the input field.
18. The adjusted value appears in the input mask. Use the on-screen keyboard to over-
write or modify the value.
19. To configure the controller press button
.
Note
The MIN and MAX limit values specify the admissible manipulated variable
range of the controller.