Flowserve SPECTORcontrol - Manual (Page 23)

23
System Menu
– continu ed –
System
To configure the system press button in the menu Overview .
■ To set the time, press button Set time .
■ To change the contrast and the brightness of
the screen, press button
Change contrast .
■ To change the language, press button
Language .
■ To change the password, press button
Change password .
■ To change the IP address, press button
Change IP .
■ To save or restore the default plant configu-
ration, press button
Factory settings .
Date and time setting
1. To set the time, click button Set time in the menu System .
2. The date/time setting is password protect-
ed. Press
and enter your password.
3. Press or above and below the date
and time settings to change the indicated
values. The values are changed incremen-
tally.
4. To accept the date and time settings press
.
System Logo
Change contrast
Language
Change password
Change IP
Canalyzer
Set time
Factory settings
Note
All changes of the configuration take an immediate effect. However, changes
of the IP address and/or the node ID will only become effective after a restart.
Date
Time
Logo