Flowserve SPECTORcontrol - Manual (Page 69)

69
Burner Menu
Burner
To adjust the burner press in the menu Overview the button .
The display field shows the current parameters of the burner.
■ To show the current values of valves press
button
Fuel .
■ To view the motor values press button Posi-
tion of actuator .
■ To show the control values press button
Common inputs/outputs .
■ To show the controller values press button
Controller .
■ To configure or evaluate datalogs press but-
ton .
■ To adjust or call up flowrates press button
.
■ To call up the malfunction history press button .
■ To configure the burner press button .
■ To go to the menu Boiler press button .
Fuel gas/oil
1. Press button Fuel in the menu Burner .
2. The menu shows the values of the burner
valves & equipment in the current operat-
ing phase. A yellow signal indicates ON
and a grey signal indicates OFF.
Burner Logo
Phase
Setpoint
Actual value
Efficiency
Flame
Fuel
O2 value
Start-up no.
Fuel
Pos. of actuator
Com. inputs/outputs
Controller
0.0 °C
0.0 °C
0.0 %
0.0 %
0.0 %
Gas
0
0
Fuel qty.
Fuel
Gas
Logo
Phase
Inputs
Pressure detector-min/
Enable sig.
Ignition
Pilot valve
Valve 1
External safety valve
Valve 2
Outputs
Pressure detector-max
Pressure detector
Tightness control