Datalogs, Datalog 1 setup, Select signal channel 1 – Flowserve SPECTORcontrol User Manual
Page 71: Burner menu
71
– con tinued –
Datalogs
1.
Press
in the menu
Burner
.
2.
The menu
Datalog
is password protected.
Press
and enter your password.
3.
The green input fields list the designations
of the datalogs in question. The left column
indicates the recording intervals.
4.
To configure a datalog, press button
Datalog 1...5
.
5.
To show a datalog click in the respective
input field. The menu
Datalog 1...5
pops
up.
Datalog 1...5 setup
1.
Press button
Datalog 1...5
in the menu
Datalogs
.
2.
To name a datalog click in the input field
Name
.
3.
The current value appears in the input
mask. Use the on-screen keyboard to
overwrite or modify the value.
4.
To select a signal click in the green input
field. The menu
Select signal channel
1...2
pops up.
Select signal channel 1...2
1.
Click in the respective input field of the menu
Datalog 1...2 Setup
.
2.
Select the signal that indicates the required para-
meters. Press one of the buttons to show all adjust-
ed signals.
For more information on the setup and configura-
tion of the equipment see menus CAN Input, Ana-
log Input and Burner.
Datalogs
Logo
Datalog 1
Datalog 2
Datalog 3
Datalog 4
Datalog 5
Datalog 1
Setup
Logo
Name
Channel 2
Channel 1
Signal channel 1
signal channel 1
CAN input
Analog input
Burner