Nrg 26-40 setup, Menus of inputs/ outputs – Flowserve SPECTORcontrol User Manual
Page 29
29
– con tinued –
NRG 26-40 setup
1.
In the menu
NRG 26-40 CAN 1...10
press
.
2.
To establish or change the node ID click in
the green input field.
3.
Use the on-screen keyboard to overwrite
or modify the value in the input mask.
4.
Use button
Node On/Off
to activate or de-
activate the node ID.
5.
To name the NRG 26-40 click in the input
field
Name
.
6.
Use the on-screen keyboard to overwrite
or modify the value in the input mask.
7.
To change the values of the NRG 26-40 click in the input field.
8.
Use the on-screen keyboard to overwrite or modify the value in the input mask.
9.
Use
to delete the adjusted equipment or to change the type of CAN electrode.
NRG 26-40
Setup
Logo
0
Name
Node Off
Node ID
0 %
0 %
0 %
0 %
Node On
Delete
electrode?
Note
The HiHi and LoLo settings can be used for alarms and the Hi and Lo settings
for switchpoints of 2-position controllers.
The alarm monitoring function is de-activated when all HiHi to LoLo values
have been set to 0%.
The node ID settings of SPECTOR
control
must agree with the settings of the
respective devices.