Flowserve SPECTORcontrol - Manual (Page 6)

6
Important Notes
Usage for the intended purpose
SPECTOR control is a visual display and operating panel with integrated programmable
logic controller (PLC).
Apart from GESTRA equipment such as level electrodes, capacitance probes,
temperature limiters and conductivity electrodes, you can also connect equipment
produced by other manufacturers (after consultation with GESTRA) and incorporate it
into the system.
Data can be exchanged safely with equipment tested and approved by GESTRA.
Any type of use differing from the usage described above must be considered as
improper. The resulting risk will have to be borne by the user alone. The manufacturer
hereby expressly rejects any claims for any damage resulting from improper usage.
S afety notes
Observe the safety notes of the enclosed specifications concerning equipment and bus
terminals.
Working methods that jeopardise safety must not be used!
Warning
The parameters of the high-level and low-level alarm electrodes required by
law can be indicated and monitored.
Note that SPECTOR
control cannot replace the control units of legally
prescribed limiters such as low-level alarms, high-level alarms and self-
monitoring temperature limiters.
Such usage is considered as improper!