Comtech EF Data CDD-56X Series Vipersat - Manual (Page 72)

Vipersat Configuration MN/22137, rev 1
3-38 Vipersat CDD-56X Series User Guide
Figure 3-49 Set LockTime prompt
To disable Hitless Switching, enter -1 for all lock times.
Apply Delay Values
To implement any modifications to the Hitless Switching parameters, enter A at
the command prompt to apply these values to the modem.
SOTM Update
This menu item appears for both the Hub unit and the Remote unit. However,
this feature is not applicable to the CDD-56X.
Unit Role
The Unit Role configuration determines whether the target CDD-56X is to
function as a Remote or as a Hub in the Vipersat satellite network. From the
Vipersat Configuration screen (figure 3-6), enter R to display the dialog
shown in figure 3-50.
Figure 3-50 Unit Role prompt
The setting for this parameter, together with the setting for the Expansion Unit,
will determine the role the target CDD-56X will perform in the network and
what type of commands and functions it will receive from the VMS. See
table 2-1 and table 2-2 for a breakdown of network roles and related functions
and features.