Comtech EF Data CDD-56X Series Vipersat - Manual (Page 129)

Appendix B - Automatic Switching B-29
MN/22137, rev 1 Entry Channel Mode Switching
Note: Refer to the Vipersat SLM-5650A modem manual for Entry Channel
configuration setup. The text referenced within is similar between the
CDM-570/L and the SLM-5650A; the UI page appearances may differ,
however.
Figure B-16 STDMA Page with Entry Channel Mode, CDM-570/570L
Switching an ECM Remote from SCPC to STDMA
Use the following procedure to switch an ECM Remote operating in SCPC
mode back to STDMA mode.
Note: This switch must be performed manually.
1. Click the Remote List menu item on the STDMA page shown in
figure B-16 above to display the STDMA Remote List shown in
figure B-17.
NOTE
NOTE