Comtech EF Data CDD-56X Series Vipersat - Manual (Page 26)

Initial Configuration MN/22137, rev 1
2-4 Vipersat CDD-56X Series User Guide
Figure 2-1 Main Menu screen
2. From the Administration screen shown in figure 2-2, select the Features
Configuration command by entering F at the command prompt.
Figure 2-2 Administration screen
3. From the Feature Configuration menu shown in figure 2-3, verify
whether or not the Vipersat Feature Codes are Available (appears as
shown in the figure). These codes are entered prior to shipment from the
factory; however, if the codes display as Unavailable, they will have to be
re-entered.