Comtech EF Data CPA - Manual (Page 88)

CPA C-Band Indoor Solid State Power Amplifier Revision 1
Ethernet-based Remote Product Management MN/CPA-IN.IOM
6–12
• MAC Address (read-only) – The MAC is set at the factory to a guaranteed unique address that
cannot be modified by the user.
Click [Change IP Address] to save. Otherwise, click [Reset] to revert to the previously assigned IP
Gateway and IP Address/Range,
System Account Access Information
• Admin, Read/Write, and Read Only Names and Passwords:
The factory defaults for these names/passwords are:
o Admin comtech/comtech
o Read/Write opcenter/1234
o Read Only monitor/1234
Note the following:
o These Name fields can be any alphanumeric combination with a maximum length of
10 characters.
o These Password fields can be any alphanumeric combination with a maximum
length of 10 characters.
• SMTP Server – Specify the mail server IP address from where you want to send the
e-mail.
• SMTP Domain Name / Destination – The Administrator can assign the SMTP Domain
Name and Destination. This is required if the e-mail feature of the Home | Support page
(Sect. 6.4.5.1.3) is to be used.
o For SMTP Domain Name, specify the domain of the e-mail server (usually found to
the right of the @ symbol in an e-mail address).
o For SMTP Domain Destination, specify the e-mail recipient name (usually found to
the left of the @ symbol in an e-mail address).
Click [Submit Access] to save. Otherwise, click [Reset] to revert to the previously assigned
System Account Access Information.
Webpage Timeout
To set an automatic timeout to safeguard access to an already logged-in unit, use the drop-
down list to set the time value as 5 minutes or 8 hours, and then click [Change].