Comtech EF Data CPA - Manual (Page 71)

CPA C-Band Indoor Solid-State Power Amplifier Revision 1
Front Panel Operation MN/CPA-IN.IOM
5–15
5.3.2 SELECT: Monitor
MONITOR: Faults Stored
Power Vltgs PS Temp FETs
The Monitor menus provide a collection of read-only status report screens, plus a management
menu for the viewing and handling of stored faults.
Typical for all displays, the screen will indicate “FT” when a fault condition exists for a specific
feature; otherwise, “OK” indicates that no faults are present.
From any menu, you may press ENTER or CLEAR to return to the previous menu.
Use the
◄ ► arrow keys to select Faults, Stored, Power, Vltgs, PS, Temp, or FETs , and then
press ENTER.
The screen examples that follow are intended for reference only. Your actual screens
will vary depending on the active, operating configuration.
5.3.2.1 MONITOR: Faults
Current Faults: Voltages
PS Temp Fan Other(◄ ► E)
Use the
◄ ► arrow keys to select Voltages, PS, Temp, Fan, or Other , and then press ENTER.
MONITOR: Faults
 Voltages
+15V = OK +7.5V = OK
+5V = OK -5V = OK (E)
MONITOR: Faults  PS (Power Supply)
28VDC PS = OK
RF Power Supply = OK
MONITOR: Faults  Tempo (Temperature)
TEMP = OK
(E)
MONITOR: Faults  Fan
FAN1 = OK
FAN2 = OK (E)