Comtech EF Data CPA - Manual (Page 38)

CPA C-Band Indoor Solid State Power Amplifier Revision 1
Connectors and Pinouts MN/CPA-IN.IOM
3–4
3.2 RF Connections
3.2.1 J1 | RF IN / Tx IN Connectors
3.2.2 J2 | RF OUT Connector
BEFORE APPLYING POWER TO THE UNIT, MAKE SURE THAT THE WAVEGUIDE
OUTPUT OF THE ISSPA IS PROPERLY LOADED OR TERMINATED. FAILURE TO DO SO
COULD LEAD TO EQUIPMENT DAMAGE AND EXCESSIVE RF RADIATION LEVELS.
Connector Type Description Direction
Type ‘N’ Female RF Signal In
Connector Type Description Direction
CPR137G Waveguide Flange RF Signal Out