Comtech EF Data CPA - Manual (Page 81)

CPA C-Band Indoor Solid State Power Amplifier Revision 1
Ethernet-based Remote Product Management MN/CPA-IN.IOM
6–5
6.4 ISSPA Web Server (HTTP) Interface
A user-supplied web browser allows the full monitor and control (M&C) of the CPA through its
ISSPA Web Server Interface. This embedded web application is designed for, and works best
with, Microsoft’s Internet Explorer Version 5.5 or higher (the examples shown use Internet
Explorer Version 9.0).
See Chapter 5. FRONT PANEL OPERATION or the Remote Commands Specifications tables found
in Chapter 7. SERIAL-BASED REMOTE PRODUCT MANAGEMENT for detailed descriptions of many
of the functions depicted throughout Sect. 6.4.5 Web Server Page Descriptions.
6.4.1 User Login
1. From the PC, type the default IP address for the CPA into
the Address area of the browser (this example uses
http://192.168.1.4):
2. At the prompt, type in a valid User name and Password,
similar to the dialog box shown to the right. For all
interfaces, the default for both is comtech.
Type the User name and Password, and then click [OK].
Failure to enter the correct User
name and Password will return
you to the Login window. Should
you continue to specify an invalid
User name or Password, the
message “You do not have security
privilege to access this area.”
displays. Otherwise, upon entry of
the valid IP address and login
information ISSPA Web Server
Interface “splash” page displays,
similar to the example shown here: