Comtech EF Data KST-2000A/B - Manual (Page 94)

Ku-Band Satellite Transceiver Revision 9
Operation MN/KST2000AB.IOM
5–10
5.3.3 Faults
The SELECT: FAULTS menu is accessible from the SELECT menu (Figure 5-7). Upon
entry, from the Select Menu, a Select Sub-level menu is displayed (Figure 5-8) allowing
access to several categories of faults.
The "*" indicator surrounding the *SELECT* display indicates the user is in the
FAULTS sub menu.
Press the [
W ] or [ X ] keys to select the desired fault category. Pressing [Enter] will enter
the indicated faults category and display the current status "OK" or "FLT" for the
displayed KST-2000A/B system. Pressing any arrow key will display the next monitored
system. Pressing the [Clear] key once will return the user to the faults menu, while
pressing the [Clear] key twice will return the user to the main SELECT menu.
Note: The upper level SELECT menu indicates "-SELECT-" while the faults menu
indicates "*SELECT*". This is done to distinguish the upper level select from the faults
level select menus.
Figure 5-7. Faults Menu Figure 5-8. Faults Sub-Level