Comtech EF Data KST-2000A/B - Manual (Page 48)

Ku-Band Satellite Transceiver Revision 9
Installation MN/KST2000AB.IOM
2–20
2.4.2.5 80 Watt SSPA Connections
Note: The data is supplied by the vendor and accompanies the unit.
2.4.3. LNA Connections
Note: The power supply for the LNA is supplied by the KST-2000A.
The RF input of the LNA is a WR-75 waveguide flange. The RF output of the LNA is a
type N, female, 50
Ω connector. The LNA power supply is applied to the RF output
connector, normally +15 V at 250 mA.
2.4.4. LNB Connections
Note: The power supply for the LNB is supplied by the KST-2000B.
The RF input of the LNB is a WR-75 waveguide flange. The RF OUT/REF/PWR IN
connector of the LNB is a type N, 50
Ω connector. It supplies the block-converted output
of 950 to 1700 MHz, and accepts +15 V at 400 mA, and a 10 MHz reference signal.