Comtech EF Data KST-2000A/B - Manual (Page 31)

Ku-Band Satellite Transceiver Revision 9
Installation MN/KST2000AB.IOM
2–3
2.3. Description of Options
Table 2-1. Description of Options
KST2000A TX ONLY OPTION
(System ordered as KST-2000A. KST-2000B TX only N/A)
LNA OPTIONS (10.95 to 12.75GHz):
(KST2000A only) 85° KLNA noise temperature
(KST2000A only) 60db gain KLNA
(KST2000A only) 85° KLNA noise temperature and 60 dB gain
(KST2000A only) Special LNA requirements outside those previously indicated
LNB OPTIONS (discrete narrow bands at 1.1db max NF only):
(KST2000B only) 10.95 to 11.70 GHz Europe and also Intelsat (11.20 to 11.70 GHz)
(KST2000B only) 11.70 to 12.20 GHz North American
(KST2000B only) 12.25 to 12.75 GHz Aussat
MOUNTING HARDWARE OPTIONS:
Standard Prodelin spar offset antenna
(base converter units are pole-mounted for redundant systems)
Standard Channel Master spar offset antenna
(base converter units are pole-mounted for redundant systems)
Non-standard single thread converter pole-mount Kit
No mounting hardware beyond the “pick off points” on the completed assembly
For mounting requirements outside those previously indicated, please consult the factory for availability.
CABLING OPTIONS:
No RF (and IF for 1:1 system) or control cabling. Includes only the prime power cable(s) and applicable MS
connectors
For cabling requirements outside those previously indicated, please consult the factory for availability.