Comtech EF Data KST-2000A/B - Manual (Page 30)

Ku-Band Satellite Transceiver Revision 9
Installation MN/KST2000AB.IOM
2–2
2.2. Redundant System Components
The standard delivered components included with a redundant system are:
QTY Description
2 Base converter units
2 HPA (no HPA necessary for the +15dBm requirement)
2 LNA (KST-2000A system) or LNB (KST-2000B system)
As Required 12ft (3.66m) Prime power cables for all converter units and applicable amplifiers
1 RJU-2000 switch junction box
As Required Interlink cabling from the base converters to the RJU-2000 switch junction box
1 15ft (4.57m) Interlink cable for the RX 1:1 waveguide LNA assembly (mounted directly to the
OMT)
1 10ft (3.05m) Interlink cable for the TX 1:1 waveguide HPA assembly (TX switching for
+15dBm 1:1 system is provided via coaxial switch)
1 3ft (1m) Flexible waveguide (connects the output of TX switch to the TX port of the OMT)
As Required Mounting hardware for a spar mounted offset antenna. (see Note)
1 M&C mating connector
Note: Antenna type shall be indicated when ordering the KST-2000A/B unit.