Avery Dennison ALX 720 - Manual (Page 76)

Operators Manual
ALX 720
4/09 Page 76 Printer adjustment
Real Time Clock _________________________________________________ CLCK
Adjusting the real time clock to the current time. This parameter can be activated only if the
optional clock is installed. The clock has a life of about 10 years. Leap years are calculated
automatically.
Adjustment to the correct time has to be performed by the user.
• press (NEXT) = forward or (PRIOR) = backward to adjust the correct time
• Press (ON/OFFLINE) - key to switch to the units of time. The cursor is moving only forward
through the units.
• Acknowledgement by pressing (ON/OFF) after the unit: YE = Year will set the adjusted time
as default.
Key Display
Function
ENTER MI.. Minutes Adjustment
ENTER HO.. Hours Adjustment
ENTER DA.. Days Adjustment
ENTER MO.. Month Adjustment
ENTER YE.. Year Adjustment
ENTER CLCK Acknowledgement
Seconds and hundredth can not be selected. Their adjustment is performed by acknowledging
the time adjustment right in the moment when the real time passes the zero line as these two
units are set back to zero in this moment.
Routine to gap detection___________________________________________LREP
The maximal length for not detected gaps can be varied. For difficult detection, i.e. little
differences in light transmittance from gap to label it is recommended to shorten the search
length in order to save labels when gaps are not found. During search no print is performed.
„R 0“
After a printed label a gap must be detected, otherwise an error message
interrupts the running print job. Ditto for search length up to max. = 5 x label length
after the last printed label, subsequently the error message appears.
Automatic label reprint ___________________________________________ COPY
Switches the automatic label reprint on/off.
ON The last printed label is reprinted in an error case.
OFF No label reprint.
Selection of Character Set _________________________________________CSET
„256“ 256 character available
at the OCR-fonts # 110 and # 116 corresponding to their specs
„224“ Characters below 20h are not accessible