Avery Dennison ALX 720 - Manual (Page 66)

Operators Manual
ALX 720
4/09 Page 66 Printer adjustment
50
Figure 16 Gap offset
Barcode height___________________________________________________ BCHI
The barcode height can be multiplied with *1 - *10 mm (factor BCHI). The effective barcode
height is calculated on the basis of the value defined in the label layout (mask) multiplied by the
enlargement factor BCHI.
Graduation of steps: 1mm
„B..1“
Smallest enlargement factor
„B.10“ Greatest enlargement factor
Example:
„BCHI“ factor is „3“.
The EASY PLUG command in the label layout is barcode height /4/.
Result: The barcode is printed in a height of (4 + 1)* 3 = 15 mm.
UPC human readable line position _________________________________ UPCA
The position of the human readable line can be adjusted
“STD”
First and last digit using the UPCA or the first digit of the UPCE are moved to the
middle of code
“SPEC”
All characters of the human readable line are in one line