AMETEK SLM Series RevC - Manual (Page 76)

Remote Programming Sorensen SLM-Series DC Load
5-20 M540071-01 Rev C
5.4.2 Query Commands
CHANNEL
Purpose:
The active channel query command.
Command Syntax:
System: CHAN？{NL}
Description:
CHAN？ return the active channel, “1-4” indicate the active channel is channel “1-4”.
CURRENT Level
Purpose:
The Constant Current mode's load current level query command.
Command Syntax:
All SLM Modules:
CC:{HIGH|LOW}{?}{;|NL}
SLD Modules: CC{?}{;|NL}
Description:
CURR:LOW? return the presently programmed low load current level in Constant Current mode of
SLM-series DC or AC electronic load module.
CURR? return the presently programmed load current level in Constant Current mode of SLD-
series electronic load module.
RESISTANCE Level
Purpose:
The Constant Resistance mode's load resistance level query command.
Command Syntax:
All SLM Modules:
CR:{HIGH|LOW}{?}{;|NL}
SLD Modules: CR{?}{;|NL}
Description:
RES:LOW? returns the presently programmed low load resistance level in Constant Resistance
mode of SLM-series DC or AC electronic load module.
RES? returns the presently programmed load resistance level in Constant Resistance mode of
SLD-series electronic load module.
The engineering unit is “OHM”.
VOLTAGE Level
The Constant Voltage mode's load voltage level query command.
Command Syntax:
SLM DC Modules:
CV:{LOW|HIGH}?{NL}
SLD Modules: CV:{NL}
Description:
CV:LOW? return the presently programmed low load voltage level in Constant Voltage mode of
SLM DC electronic load module.