AMETEK SLM Series RevC - Manual (Page 50)

Applications Sorensen SLM-Series DC Load
4-2 M540071-01 Rev C
4.2
Remote Sense Connections
Figure 4-2 illustrates a typical set up with the electronic load connected for remote sense operation.
The remote V-sense BNC cable of the electronic load is connected to the power supply output.
Remote sensing compensates for the voltage drop in applications that require long lead lengths.
The 5-digit voltage Meter of SLM-series DC electronic load measures the voltage of V-sense BNC input
terminal automatically, so the high accuracy 5-digit voltage meter can measure at the power supply
output. Load leads should be bundled or tie wrapped together to minimize inductance.
Figure 4-2 Remote Voltage Sense Connections