AMETEK SLM Series RevC - Manual (Page 42)

Operation Sorensen SLM-Series DC Load
3-14 M540071-01 Rev C
5. Operating in Dynamic Mode:
a. Press the MODE key (3), until the desired mode LED (3) is lit, CP or CC only.
b. Press the DYN/STA key (10) until its amber LED is lit.
c. Press the LOAD key (8) to turn the load on (amber LED is lit).
Shorts Mode
Shorts mode puts the load in minimum resistance/maximum current state.
1. To turn on shorts mode, press the SHORT key (11) until its LED is lit. This overrides any
selection made with the MODE key. When the LOAD key is toggled to ON, the load
simulates a short by sinking maximum rated current at minimum resistance.
2. To exit shorts mode, press the SHORT key (11) until its LED is not lit.