AMETEK SLM Series RevC - Manual (Page 19)

Sorensen SLM-Series DC Load Introduction, Features, Specifications
M540071-01 Rev C 1-7
1.2 Features
• Flexible configuration of plug-in electronic load module and mainframe
• CC, CR, CV, CP, Dynamic, and Short Operating Mode
• Remote control of load condition setting and meter read back
• Dual high accuracy & resolution 16-bit voltage and current meter
• Built-in pulse generator includes wide T
HIGH /T LOW dynamic load range, independent Rise/Fall load
current slew rate control, and High/Low Load level
• Controllable load current slew rate of load level change, load ON/OFF switch change, and power
supply turn-on
• Short circuit test and current measure capability
• Programmable voltage sense capability
• Full protection from over power, over temperature, over voltage, and reverse polarity
• Analog programming input capability at each load module
• Isolated I-monitor BNC output, 10V full scale (except models with maximum voltage >100V)
• Digital calibration
• Variable fan speed control
• Up to 150 Sets Store/Recall EEPROM memory
1.2.1 Accessories
• V-sense cable: BNC-CLIP (1M) 1 ea.
• Binding Post Plug (Black) 1 ea.
• Binding Post Plug (Red) 1 ea.
• Hook terminal 2 ea.
• SLM-series operation manual 1 ea.
• High Voltage V-sense Cable: BNC-CLIP 1M (250 and 500V models) 1 ea.