AGI Security SYS-HC0451 HDCVI DVR User Manual - Manual (Page 77)

HDCVI Standalone DVR User’s Manual
68
Item Note
the video brightness if the value is high. But the video
noise may become too clear.
Color mode It includes several modes such as standard, color, bright,
gentle. Select a color mode, the sharpness, brightness,
contrast and etc can automatically switch to
corresponding setup.
EQ Click reset button, device can automatically adjust to the
best display effect.
Note:
This function is for analog channel only.
Position It is to adjust the image position on the screen. The
digital stands for the pixel. The default pixel is 16.
Note:
This function is for analog channel only.
4.4.6 Search
Please refer to chapter 4.8.1 for detailed information.
4.4.7 Manual Record
Please refer to chapter 4.10.4.3.1 for detailed information.
4.4.8 Alarm Output
Please refer to chapter 4.10.3.4 for detailed information.
4.4.9 Remote Device
Please note it is for digital channel only.
Please refer to chapter 4.10.1.1 for detailed information.
4.4.10 Video Matrix
Please refer to chapter 4.10.5.3 for detailed information.
4.4.11 Main menu
Please refer to chapter 4.7 for detailed information.
4.5 Navigation Bar
You need to go to the Main menu->Setting->System->General to enable navigation
bar function; otherwise you can not see the following interface.
The navigation bar is shown as below. See Figure 4-25.