AGI Security SYS-HC0451 HDCVI DVR User Manual - Manual (Page 117)

HDCVI Standalone DVR User’s Manual
108
4.10.2.2 Connection
The connection setup interface is shown as in Figure 4-73.
 Max connection: system support maximal 128 users. 0 means there is no connection
limit.
 TCP port: Default value is 37777.
 UDP port: Default value is 37778.
 HTTP port: Default value is 80.
 HTTPS port: Default value is 443.
 RTSP port: Default value is 554.
Important: System needs to reboot after you changed and saved any setup of the
above four ports. Please make sure the port values here do not conflict.
Figure 4-73
4.10.2.3 WIFI
The WIFI interface is shown as below. See Figure 4-74.
 Auto connect WIFI: Check the box here, system automatically connects to the
previous WIFI hotspot.
 Refresh: You can click it to search the hotspot list again. It can automatically add the
information such as the password if you have set it before.
 Disconnect: Here you can click it to turn off the connection.
 Connect: Here you can click it to connect to the hotspot. System needs to turn off
current connection and then connect to a new hotspot if there is connection of you
selected one.