AGI Security SYS-HC0451 HDCVI DVR User Manual - Manual (Page 239)

HDCVI Standalone DVR User’s Manual
230
The interface is shown as in Figure 5-92.
Figure 5-92
Please refer to the following sheet for detailed information.
Parameter Function
Enable This function is disabled by default. Check the box here to enable
this function so that you can control the zero-channel encoding
function at the WEB.
Compression System default setup is H.264. You can set according to device
capability.
Resolution The resolution value may vary due to different device capabilities.
Please select from the dropdown list.
Frame rate The frame rate value may vary due to different device capabilities.
Please select from the dropdown list.
Bit Rate The default setup is 1024Kb/S. The bit rate value may vary due to
different device capabilities and frame rate setups. Please select
from the dropdown list.
5.8.5.3 Video Matrix
The interface is shown as in Figure 5-93.
Here you can set video output channel and interval.