4 channel name, 5 channel type – AGI Security SYS-HC0451 HDCVI DVR User Manual User Manual
Page 200
HDCVI Standalone DVR User’s Manual
191
Here you can set snap image saved path (
in the preview interface) and the record
storage path (
in the preview interface).The default setup is C:\PictureDownload
and C:\RecordDownload.
Please click the Save button to save current setup.
Figure 5-23
5.8.1.4 Channel Name
Here you can set channel name. See Figure 5-24.
Figure 5-24
5.8.1.5 Channel Type
This function is for some series only. Some series products support analog
standard definition connections/analog HD connection/network camera
connection while some series products support analog HD connection/network
camera connection only.
For HDCVI signal and analog standard definition signal, system can auto
recognize channel type, there is no need to set or restart. For analog channels,
the interface here is to display channel type only. You can change cable mode
(Coaxial/UTP) if you are using HDCVI.
It is to set channel type. Each channel supports analog camera （analog standard
definition/HDCVI） /network camera connection. Please note DVR needs to restart to
activate new setup. The network camera connection shall begin with the last channel. For
the 16-channel (or higher) series product, please go to the next page to set. See Figure