AGI Security SYS-HC0451 HDCVI DVR User Manual - Manual (Page 256)

HDCVI Standalone DVR User’s Manual
247
Figure 5-123
5.11 Alarm
Click alarm function, you can see an interface is shown as Figure 5-124.
Here you can set device alarm type and alarm sound setup (Please make sure you have
enabled audio function of corresponding alarm events.).
Figure 5-124
Please refer to the following sheet for detailed information.
Type Parameter Function
Alarm
Type
Video loss System alarms when video loss occurs.
Motion detection System alarms when motion detection alarm
occurs.
Tampering System alarms when camera is viciously masking.
Disk full System alarms when disk is full.
Disk error System alarms when disk error occurs.