beautypg.com

1 record control, 2 snapshot operation – AGI Security SYS-HC0451 HDCVI DVR User Manual User Manual

Page 157

background image

HDCVI Standalone DVR User’s Manual

148

4.10.4.3.1 Record Control

Note:

You need to have proper rights to implement the following operations. Please make

sure the HDD has been properly installed.

There are three ways for you to go to manual record menu.
 Right click mouse and then select Manual->Record.
 In the main menu, from Setting->Storage->Record.
 In live viewing mode, click record button in the front panel or record button in the

remote control.

System supports main stream and sub stream. There are three statuses:

schedule/manual/stop. See Figure 4-126. Please highlight icon “ ○ ” to select

corresponding channel.
 Manual: The highest priority. After manual setup, all selected channels will begin

ordinary recording.

 Schedule: Channel records as you have set in recording setup (Main

Menu->Setting->System->>Schedule)

 Stop: Current channel stops recording.
 All: Check All button after the corresponding status to enable/disable all-channel

schedule/manual record or enable/disable all channels to stop record.

Figure 4-126

4.10.4.3.2 Snapshot Operation

Check the corresponding box to enable/disable schedule snapshot function. See

Figure 4-127.

This manual is related to the following products: