AGI Security SYS-HC0451 HDCVI DVR User Manual - Manual (Page 38)

HDCVI Standalone DVR User’s Manual
29
SN Icon Name Function
B
RS485_B.It is the cable B.
You can connect to the
control devices such as
speed dome PTZ.
T+、T-、R+、R-
Four-cable full-duplex
485 port.
T+, T-: Send out cable.
R+, R-: Input cable.
CTRL 12V Control power output
Turn off power output when
the alarm is cancelled.
8
Network port 1000M Ethernet port
9 RS-232
RS232 debug port It is for general COM debug
to configure IP address or
transfer transparent COM
data.
10 VGA
VGA video output port VGA video output port.
Output analog video signal. It
can connect to the monitor to
view analog video.
11 eSATA
eSATA port External SATA port. It can
connect to the device of the
SATA port.
12
USB2.0 port Connect to mouse, USB
storage media, USB-burner
and etc.
13 HDMI2
High definition media
interface 2
HD video matrix output.
Support zero-channel
encoding matrix output.
Support tour.
14 HDMI1
High definition media
interface 1
High definition audio and
video signal output port. It
transmits the same video
signal as the VGA/TV.
Support mouse operation.
15
Power socket and power
switch
Power input port/power
on/off button.
2.2.3 4/8-Channel Advanced 1080P 2U Series
This series products ’ rear panel is shown as below. See Figure 2-5.