AGI Security SYS-HC0451 HDCVI DVR User Manual - Manual (Page 183)

HDCVI Standalone DVR User’s Manual
174
Figure 4-162
4.10.5.10 Config Backup
The configuration file backup interface is shown as below. See Figure 4-163.
This function allows you to import/export system configuration. You can use this function
when there are several devices need the same setup.
 Export: Please connect the peripheral device first and then go to the following
interface. Click Export button, you can see there is a corresponding “Config_Time”
folder. Double click the folder, you can view some backup files.
 Import: Here you can import the configuration files from the peripheral device to
current device. You need to select a folder first. You can see a dialogue box asking
you to select a folder if you are selecting a file. System pops up a dialogue box if
there is no configuration file under current folder. After successfully import, system
needs to reboot to activate new setup.
 Format: Click Format button, system pops up a dialogue box for you to confirm
current operation. System begins format process after you click the OK button.
Note:
 System can not open config backup interface again if there is backup operation in the
process.
 System refreshes device when you go to the config backup every time and set
current directory as the root directory of the peripheral device.
 If you go to the configuration backup interface first and then insert the peripheral
device, please click Refresh button to view the newly added device.