AGI Security SYS-HC0451 HDCVI DVR User Manual - Manual (Page 162)

HDCVI Standalone DVR User’s Manual
153
 Quick detect: It is to detect the storaged files on the HDD. You can use format
function to repair the bad track. System can not detect the bad track if there is no
record on the HDD.
 Global detect: It detects the whole HDD. The process may take a long time and may
affect the HDD that is saving the record. If it detects the bad track, it may result from
the damaged HDD.
4.10.4.6.1 Manual Detect
The manual detect interface is shown as below. See Figure 4-134.
Please select detect type and HDD. Click start detect to begin. You can view the
corresponding detect information.
Figure 4-134
4.10.4.6.2 Detect Report
After the detect operation, you can go to the detect report to view corresponding
information.
The detect report interface is shown as below. See Figure 4-135.