AGI Security SYS-HC0451 HDCVI DVR User Manual - Manual (Page 212)

HDCVI Standalone DVR User’s Manual
203
5.8.2.15 Alarm Centre
The alarm centre interface is shown as below. See Figure 5-41.
This interface is reserved for you to develop. System can upload alarm signal to the alarm
centre when local alarm occurs.
Before you use alarm centre, please set server IP, port and etc. When an alarm occurs,
system can send out data as the protocol defined, so the client-end can get the data.
Figure 5-41
5.8.2.16 HTTPS
In this interface, you can set to make sure the PC can successfully login via the HTTPS. It
is to guarantee communication data security. The reliable and stable technology can
secure the user information security and device safety. See Figure 5-42.
Note
 You need to implement server certificate again if you have changed device IP.
 You need to download root certificate if it is your first time to use HTTPS on
current PC.
Figure 5-42
5.8.2.16.1 Create Server Certificate
If it is your first time to use this function, please follow the steps listed below.
In Figure 5-42, click button, input country name, state name
and etc. Click Create button. See Figure 5-43.
Note
Please make sure the IP or domain information is the same as your device IP or domain
name.